Transponder
Description: A transponder is a transmitting unit with a defined frequency range. It is used
Literature & Tools
Mecadi provides you the opportunity to either get a general idea of our work with the help of a description or a summary of current booklets, reports, publications and standard sheets, or there is also the possibility to order the complete documents. The available information is ordered by publishing form, so that you can find the information you require quickly and easily.
Weiterlesen »
DIN EN 1062-3:2008-04
Title: Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete
DIN EN ISO 15106-1:2005-05
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part
ISO 11092:1993-10
Title: Textiles; physiological effects; measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate
DIN EN 1015-19
Title: Methods of test for mortar for masonry – Part 19: Determination of water vapour
ISO 6530:2005-02
Title: Protective clothing – Protection against liquid chemicals – Test method for resistance of materials
Chlorine-Sulfonated-Polyethylene (CSM or CSPE)
Description: Chlorine-sulfonated polyethylene containing 1.5% sulfur and 27% chlorine. Its properties are comparable to those
DIN 10964:1996-02
Titel: Sensorische Prüfverfahren – Einfach beschreibende Prüfung Kategorie: Sensorische Analyse Bitte beachten Sie: Vollständige Normblätter
OENORM EN ISO 6529:2003-08-01
Title: Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials
Tetrafluoroethylene-Hexafluoropropylene-Vinylidenefluoride- Fluoroterpolymer (TFB)
Description: TFB is a thermoplastic fluoroterpolymer, which consists of tetrafluoroethylene (TFE), hexafluoropropylene (HFP) and vinylidenefluoride
Time-lag
Description: Time needed by a chemical for permeating through a material. An important characteristic, e.g.
ISO 2782:2006-10
Title: Rubber, vulcanized or thermoplastic — Determination of permeability to gases Categor<: Elastomer Please note:
DIN EN ISO 2556:2001-01
Title: Plastics – Determination of the gas transmission rate of films and thin sheets under
Polychloroprene (CR)
Description: Raw monomeric chloroprene is a colourless fluid. It is insoluble in water but soluble
DIN EN 16523-1
Title: Determination of material resistance to permeation by chemicals – Part 1: Permeation by liquid
Permeation tubes
Description: Permeation tubes are small, inert tubes containing a chemical compund in its pure form.
Fluororubber (FPM)
Description: FPM is an elastomer based on fluoro-rubber. FPM is characterised by his resistance to
Carboxylated-Nitrile-Butadiene-Rubber (XNBR)
Description: Produced by adding a carboxylic acid group to a nitrile-rubber, this material contains more
DIN EN 14126:2004-01
Title: Protective clothing – Performance requirements and test methods for protective clothing against infective agents;
Ethylene-Vinyl-Alcohol-Copolymer (EVOH)
Description: Produced by hydrolysing ethylene-vinyl-acetate polymers. EVOH features good barrier qualities, mechanical stability, elasticity, brightness,
Poly-Phenylene-Oxide (PPO)
Description: PPOs are a family of amorphous, intransparent, light-grey-colored thermoplastics. They feature an outstanding stability
ASTM F1194-99(2005)
Title: Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in
E-85 Fuel
Description: Testing fuel for determining permeation and resistance properties in general. Composition: 79 – 86
Diffusion
Description: Diffusion is the mechanism causing microscopic particles from fluids or gases to spread out
ISO 15106-3
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part
Polyethylene (PE)
Description: Raw PE can be obtained in form of a milky white, partly crystalline powder
DIN 10967-3:2001-08
Title:Sensory analysis – Investigation of profiles – Part 3: Free choice profiling Category: Sensory Analysis
DIN EN 374-3:2003-12
Title: Protective gloves against chemicals and micro-organisms – Part 3: Determination of resistance to permeation
DIN EN 13625:2002-03
Title: Non-destructive testing – Leak test – Guide to the selection of instrumentation for the
Facilitated Diffusion
Description: The process called facilitated diffusion takes place when a substance passes through a membrane
Vinylidenefluoride-Hexafluoropropylene-Fluorocopolymer (VDF/HFP)
Description: Odourless, transparent and thermoplastic fluorocopolymer consisting of vinylidenefluoride and hexafluoropropylene. Usage: envelope for fibre-glass
ISO 3591:1977-06
Title: Sensory analysis; Apparatus; Wine-tasting glass Category: Sensory Analysis Please note: Complete standard sheets are
ASTM F372-99
Title: Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an
Polymer
Description: A polymer is a chemical compund that consists of molecule chains (macromolecules). The process
Chemistry
Description: Chemistry means the science dealing with the structure and the behaviour of matter as
Acrylic-nitrile-Butadiene-Rubber (Buna-N) (NBR)
Description: Copolymere consisting of butadiene and acrylic nitrile. Good resistance to hydrocarbons out of mineral
DIN EN 388
Title: Protective gloves against mechanical risks Category: Protective Clothing Please note: Complete standard sheets are
Permeation rate
Description: Permeation rate is a measurement for the amount of substance (permeate) permeating through a
Acrylic-nitrile-Methyl-Acrylate-copolymers (AMA)
Description: Transparent, modiefied Nitrile with excellent chemical stability, high gas barrier and high resistance module.
Acidic Acrylic-acid-ionomers of ethylene
Description: Containing a quite small number of ionised acid groups, these ionomers are characterised by
DIN 4815-1:2009-06
Title: Rubber and plastics hoses for liquefied petroleum gas – Part 1: Hoses and tubings
Ethylene-Propylene-(Diene-)Rubber (EPM and EPDM; EPM = copolymer; EPDM = terpolymer)
Description: Application temperatures up to ca. +130°C, resistant to water, steam and weather.EPDM can be
ISO 14268:2002-12
Title: Leather – Physical and mechanical tests – Determination of water vapour permeability Category: Leather
Composite
Description: Composites are materials consisting of several other materials, whereby all technical relevant properties are
DIN 10967-2:2000-10
Title: Sensory analysis – Investigation of profiles – Part 2: Consensus profile Category: Sensory Analysis
Solvent
Description: Solvents are fluids that are able to contain gases, solids, and other fluids without
(general) Acrylate-rubber (ACM)
Description: features an excellent resistance to heat and hot oil. ACM ist also resistant to
DIN EN 943-2:2002-04
Title: Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles –
DIN EN 993-4
Title: Methods of test for dense shaped refractory products – Part 4: Determination of permeability
Epoxy Resins (EP)
Description: These polyethers containing cross-linkable glycidyl groups are usually produced by polimerisation of Bisphenol A
ISO 6145-10:2002-02
Title: Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part
ISO 15106-2
Title: Plastics; Film and sheeting – Determination of water vapour transmission rate – Part 2:
Melamine-Formaldehyde (MF)
Descpription: Also called melamine resin; temperable condensation product of melamine and formaldehyde; colourless and transparent.
ISO 13302:2003-08
Title: Sensory analysis – Methods for assessing modifications to the flavours of foodstuffs due to
Technologiereport
The technology report “Removal of carbon dioxide from carbon dioxide hydrogen mixtures with amine functionalized
ISO 12572:2001-06
Title: Hygrothermal performance of building materials and products – Determination of water vapour transmission propertiest
ISO 11058
Title: Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane,
ISO 2782-2
Title: Rubber, vulcanized or thermoplastic – Determination of permeability to gases – Part 2: Equal-pressure
DIN EN 13034:2009-08
Title: Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited
DIN EN 12087:2007-06
Title: Thermal insulating products for building applications – Determination of long term water absorption by
DIN EN ISO 6529:2003-01
Title: Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials
DIN EN ISO 15106-2:2005-05
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part
ASTM F2622-8
Title: Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using
DIN EN ISO 6179
Title: Rubber, vulcanized or thermoplastic – Rubber sheets and rubber-coated fabrics – Determination of transmission
DIN 10955:2004-06
Title: Sensory analysis – Testing of packaging materials and packages for foodstuffs Category: Sensory Analysis
DIN EN 1518:1998-06
Title: Non-destructive testing – Leak testing – Characterization of mass spectrometer leak detectors; German version
TF 1
Description: Testing fuel for determining permeation and resistance properties in general. Composition: 10 vol% Ethanol
Pouch Method
Description: Technique for permeation rate measurement of a fluid through a film-like polymer. The material
ISO 1663:2007-05
Title: Rigid cellular plastics – Determination of water vapour transmission properties Category: Cellular Plastics Please
NF X20-209:1979-12-01
Title: Preparation of calibration gas mixtures. Permeation method. Category: Preparation of Calibration Gas Please note:
ASTM F1307-02
Title: Standard Test Method for Oxygen Transmission Rate through dry Packages; Using a Coulometric Sensor
DIN EN 14786
Title: Protective clothing – Determination of resistance to penetration by sprayed liquid chemicals, emulsions and
DIN EN 13469:2001-12
Title: Thermal insulating products for building equipment and industrial installations – Determination of water vapour
Barrier Coating
Description: Coating that prevents a substance from permeating through a such protected surface. Materials whose
Perflourated-dimethyl-dioxole/Tetraflourinated-ethylen-Copolymer (PDD/TFE)
Description: Thermoplastic of milky white color that feels like wax. Because of its special properties,
ISO 7229:1997-02
Title: Rubber- or plastics-coated fabrics — Measurement of gas permeability Category: Coated Fabrics Please note:
ISO 17491-3:2008-08
Title: Protective clothing – Test methods for clothing providing protection against chemicals – Part 3:
DIN EN ISO 4080:1995-04
Title: Rubber and plastics hoses and hose assemblies – Determination of permeability to gas (ISO
ASTM D5886-95(2006)
Title: Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through
ISO/DIS 15105-1
Beschreibung: Norming data sheet dealing with “Plastics – Film and sheeting – determination of the
ISO 15105-1
Title: Plastics – Film and sheeting – Determination of gas-transmission rate – Part 1: Differential-pressure
Functionalised polymers
Description: Functionalised polymers are chemical compounds composed of molecular chains (macromolecules) with funtionalised side chains.
DIN EN 1931
Title: Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing –
ISO 4593
Description: Norming data sheet dealing with “Plastics – Film and sheeting – determination of the
Silicone-Rubber (MQ, PMQ, PVMQ, VMQ)
Description: Polysiloxane is a normally odorless and non-toxic material that is stable within a wide
Polynorbornen (PNB)
Description: PNB is an amorphous polymer with high thermal stability, optical transparency and a low
Polybutene (Polybutylene, PB)
Description: Flexible and linear structured polyolefines; the homopolymers are produced from But-1-en, the copolymers contain
ASTM D1653-03(2008)
Title: Standard Test Methods for Water Vapor Transmission of Organic Coating Films Category: Paints &
DIN EN 1609:2007-06
Title: Thermal insulating products for building applications – Determination of dimensional short term water absorption
ISO 2528
Title: Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method Category:
Polyethylenesuccinate (PES)
Description: A polybutylene succinate produced from blown film has large anisotropy of the tensile strength
ASTM D471-06e1
Title: Standard Test Method for Rubber Property -Effect of Liquids Category: Elastomer Please note: Complete
DIN 53370:2006-11
Title: Testing of plastics films – Determination of the thickness by mechanical scanning Category: Plastic
ASTM F1249-06
Title: Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using
DIN 10462:1988-10
Title: Sensory analysis and benchmark of milk Please note: Withdrawn standard Category: Sensory Analysis Please
FAM A
Description: Testing fuel for determining permeation and resistance properties in general. Composition: 50 Vol.% Toluene
ISO 15106-4
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part
Catalyst
Description: A substance accelerating normally slow-running chemical or biochemical reactions is called catalyst. The catalyst
DIN EN ISO 6530:2005-05
Title: Protective clothing – Protection against liquid chemicals – Test method for resistance of materials
Do you need help or information?
ask
Dr. Andreas Konrad