ISO 2782:2006-10
Title: Rubber, vulcanized or thermoplastic — Determination of permeability to gases Categor<: Elastomer Please note: Complete standard sheets are made available by Beuth Verlag.
Standardsystems
OENORM EN ISO 6529:2003-08-01
Title: Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) Category: Protective
ISO 11092:1993-10
Title: Textiles; physiological effects; measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) Category: Textiles Please note: Complete standard sheets are made
DIN EN 1062-3:2008-04
Title: Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 3: Determination of liquid water permeability; German version
DIN EN ISO 2556:2001-01
Title: Plastics – Determination of the gas transmission rate of films and thin sheets under atmospheric pressure – Manometric method (ISO 2556:1974); German version EN
DIN EN 1015-19
Title: Methods of test for mortar for masonry – Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars Category: Building Materials
DIN 10964:1996-02
Titel: Sensorische Prüfverfahren – Einfach beschreibende Prüfung Kategorie: Sensorische Analyse Bitte beachten Sie: Vollständige Normblätter erhalten sie beim Beuth Verlag.
ASTM F1194-99(2005)
Title: Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing Category: Protective Clothing Please note: Complete standard sheets
ISO 15106-3
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 3: Electrolytic detection sensor method Category: Plastic Film and Packaging
DIN EN 16523-1
Title: Determination of material resistance to permeation by chemicals – Part 1: Permeation by liquid chemical under conditions of continuous contact Category: Building Materials and
DIN EN 13625:2002-03
Title: Non-destructive testing – Leak test – Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001 Category: Leak
DIN 10967-2:2000-10
Title: Sensory analysis – Investigation of profiles – Part 2: Consensus profile Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth
ISO 15106-2
Title: Plastics; Film and sheeting – Determination of water vapour transmission rate – Part 2: Infrared detection sensor method Category: Plastics Related standards: DIN 53380-4,
DIN 10955:2004-06
Title: Sensory analysis – Testing of packaging materials and packages for foodstuffs Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth
ASTM F2622-8
Title: Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors Category: Plastics Please note: Complete standard sheets are
DIN EN 12087:2007-06
Title: Thermal insulating products for building applications – Determination of long term water absorption by immersion; German version EN 12087:1997 + A1:2006 Category: Thermal Insulating
DIN EN 13034:2009-08
Title: Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB
DIN EN ISO 6529:2003-01
Title: Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001); German version
ISO 12572:2001-06
Title: Hygrothermal performance of building materials and products – Determination of water vapour transmission propertiest Category: Building Materials and Products Please note: Complete standard sheets
ISO 2782-2
Title: Rubber, vulcanized or thermoplastic – Determination of permeability to gases – Part 2: Equal-pressure method Category: Elastomer Related standards: ISO 15105-2 Please note: Complete
DIN EN 14786
Title: Protective clothing – Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions – Atomizer test Category: Protective Clothing Please note: Complete
DIN EN 1518:1998-06
Title: Non-destructive testing – Leak testing – Characterization of mass spectrometer leak detectors; German version EN 1518:1998 Category: Leak Testing Please note: Complete standard sheets
ISO 7229:1997-02
Title: Rubber- or plastics-coated fabrics — Measurement of gas permeability Category: Coated Fabrics Please note: Complete standard sheets are made available by Beuth Verlag.
ASTM D1653-03(2008)
Title: Standard Test Methods for Water Vapor Transmission of Organic Coating Films Category: Paints & Coatings Please note: Complete standard sheets are made available by
DIN EN 1931
Title: Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of water vapour transmission properties; German version EN 1931:2000
ASTM F1249-06
Title: Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor Category: Water Vapor Permeability Related standards:
DIN 10462:1988-10
Title: Sensory analysis and benchmark of milk Please note: Withdrawn standard Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth Verlag.
ISO 2528
Title: Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method Category: Paints & Coatings Related standards: DIN 53122-1, ISO 6179 Please
NF S75-501-3; NF EN 374-3:2004-04-01
Title: Protective gloves against chemicals and micro-organisms – Part 3 : determination of resistance to permeation by chemicals. Category: Plastic Film and Packaging Please note:
ASTM D3079-94(2009)e1
Title: Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products Category: Plastic Film and Packaging Please note: Complete standard sheets
ASTM D6304-07
Title: Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration Category: Determination of Water Content
ASTM F739-07
Title: Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact Category:Protective Clothing Please note: Complete standard
DIN EN 1779:1999-10
Title: Non-destructive testing – Leak testing – Criteria for the method and technique selection; German version EN 1779:1999 Please note: Has been revised: DIN EN
DIN EN ISO 6530:2005-05
Title: Protective clothing – Protection against liquid chemicals – Test method for resistance of materials to penetration by liquids (ISO 6530:2005); German version EN ISO
DIN EN 12023:1996-11
Title: Self adhesive tapes – Measurement of water vapour transmission in a warm humid atmosphere; German version EN 12023:1996 Category: Adhesives & Sealants Please note:
DIN EN ISO 9237
Title: Textiles – Determination of permeability of fabrics to air (ISO 9237:1995); German version EN ISO 9237:1995 Category: Textiles Related standards: ISO 7231, ISO 8272,
DIN 53380-2
Title: Testing of plastics – Determination of gas transmission rate – Part 2: Manometric method for testing of plastic films Category: Plastics Please note: Complete
TAPPI T464 OM-12
Title: Water Vapor Transmission Rate of Paper and Paperboard at High Temperature and Humidity Category: Paper and Board Please note: Complete standard sheets are made
DIN 55431-3:1987-12
Title: Package; composite can; Test methods for water vapour permeability; gravimetric summary procedure Please note: Withdrawn standard Category: Packaging Please note: Complete standard sheets are
DIN EN 13832-1:2006-11
Title: Footwear protecting against chemicals – Part 1: Terminology and test methods; German version EN 13832-1:2006 Category: Footwear Please note: Complete standard sheets are made
JIS K 7129
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Instrumental method Category: Plastic Film and Packaging Please note: Complete standard
ASTM F739-12
Title: Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact Category: Protective Clothing Please note: Complete
ISO 9932:1990-10
Title: Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods Category: Paper and Board
DIN EN ISO 17081:2008-07
Title: Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2004); German version EN
DIN EN 13832-2:2006-11
Title: Footwear protecting against chemicals – Part 2: Requirements for footwear resistant to chemicals under laboratory conditions; German version EN 13832-2:2006 Category: Footwear Please note:
JIS Z 0208
Title: Testing methods for determination of the water vapour transmission rate of moisture-proof packaging materials (dish method) Category: Plastic Film and Packaging Related standards: DIN
DIN 10956:2007-08
Title: Apparatus for sensory analysis – Universal testing glasses and lids – Requirements and instructions for use Category: Sensory Analysis Please note: Complete standard sheets
JIS L 1099:2006-10-20
Title: Testing methods for water vapour permeability of textiles Category: Textiles Please note: Complete standard sheets are made available by Beuth Verlag.
DIN 53380-3
Title: Testing of plastics – Determination of gas transmission rate – Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings
ISO 13301:2002-09
Title: Sensory analysis – Methodology – General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure Category: Sensory Analysis
DIN 18556:1985-01
Title: Testing of coating material for synthetic resin plasters and of synthetic resin plasters Category: Paints & Coatings Please note: Complete standard sheets are made
DIN EN 374-1:2003-12
Title: Protective gloves against chemicals and micro-organisms – Part 1: Terminology and performance requirements; German version EN 374-1:2003 Please note: q. v. draft standard DIN
ASTM F2207-06
Title: Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe Category: Paints & Coatings Please note: Complete standard sheets are made
ASTM D5886-95(2001)
Title: Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications Category:Geomembranes and Geotextiles Please note: Complete
DIN 55431-4:1990-05
Title: Packages; tins; composite can, round, cylindric; Examination on impermeability opposite liquid filling materials Please note: Withdrawn standard Category: Packaging Please note: Complete standard sheets
DIN 10972:2003-08
Title: Sensory testing method – “A” – “not A” testing Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth Verlag.
ISO 6179:1998-04
Title: Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique) Category: Elastomer Please note:
ISO 13994:2005-10
Title: Clothing for protection against liquid chemicals – Determination of the resistance of protective clothing materials to penetration by liquids under pressure Please note: Has
Federal Standard No. 191, Method 5030.2
Title:Measurement of the Thickness of Materials Category: Measurement of Thickness Please note: Complete standard sheets are made available by Beuth Verlag.
DIN EN ISO 17491-3:2008-12
Title: Protective clothing – Test methods for clothing providing protection against chemicals – Part 3: Determination of resistance to penetration by a jet of liquid
DIN EN 927-5:2007-03
Title: Paints and varnishes – Coating materials and coating systems for exterior wood – Part 5: Assessment of the liquid water permeability; German version EN
ISO 21129:2007-07
Title: Hygrothermal performance of building materials and products – Determination of water-vapour transmission properties – Box method Category: Building Materials and Products Please note: Complete
ISO 6529:2001-10
Title: Protective clothing — Protection against chemicals — Determination of resistance of protective clothing materials to permeation by liquids and gases Category: Protective Clothing Please
DIN 10455:1989-04
Title: Sensory analysis of butter Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth Verlag.
ASTM D6701-01
Title: Standard Test Method for Determining Water Vapor Transmission Rates through nonwoven and Plastic Barriers Please note: Withdrawn standard, no replacement Category: Plastic Film and
ISO 15106-1
Title: Plastics; Film and sheeting – Determination of water vapour transmission rate – Part 1: Humidity detection sensor method Category: Plastics Related standards: DIN EN
ISO 17081:2004-11
Title: Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique Category: Hydrogen Permeation Please note:
DIN EN ISO 14268:2003-10
Title: Leather – Physical and mechanical tests – Determination of water vapour permeability (ISO 14268:2002); German version EN ISO 14268:2002 Category: Leather Please note: Complete
ISO 9073-15
Title: Textiles – Test methods for nonwovens – Part 15: Determination of air permeability Category: Textiles Related standards: ISO 9237, ISO 7231, ISO 8272, ISO
ISO 8272
Title: Doorsets – Air permeability test Category: Building Materials and Products Related standards: ISO 9237, ISO 7231, ISO 6613, ISO 4638, ISO 9073-15, DIN 51935
ISO 2896:2001-07
Title: Rigid cellular plastics — Determination of water absorption Category: Cellular Plastics Please note: Complete standard sheets are made available by Beuth Verlag.
ASTM D4279-95(2009)
Title: Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods Category: Water Vapor Permeability Please note: Complete standard sheets are made
ISO 4022:1987-10
Title: Permeable sintered metal materials — Determination of fluid permeability Category: Sintered Metals Please note: Complete standard sheets are made available by Beuth Verlag.
DIN 10967 Beiblatt 1:2000-07
Title: Sensory analysis – Investigation of profiles – Examples for the statistical evaluation Category: Sensory Analysis Please note: Complete standard sheets are made available by
TAPPI T523
Title: Dynamic Measurement of Water Vapor Transfer Through Sheet Materials Category: Plastic Film and Packaging Please note: Complete standard sheets are made available by Beuth
ISO 2782-1
Title: Rubber, vulcanized or thermoplastic – Determination of permeability to gases – Part 1: Differential-pressure methods Category: Elastomer Related standards: ISO 15105-1, GB/T 1038-2000 Please
ISO 5496:2006-08
Title: Sensory analysis – Methodology – Initiation and training of assessors in the detection and recognition of odours Category: Sensory Analysis Please note: Complete standard
DIN 4815-3:1985-07
Title: Flexible tubes for LPG; flexible tubes for filling and emptying of transportation vehicles Category: Hoses Please note: Complete standard sheets are made available by
DIN EN ISO 7231
Title: Polymeric materials, cellular flexible – Method of assessment of air flow value at constant pressure-drop (ISO 7231:1984); German version EN ISO 7231:1997 Please note:
ASTM F1359-07
Title: Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin Category: Protective Clothing
ISO 1399
Title: Rubber, vulcanized – Determination of permeability to gases – Constant volume method Category: Plastics Please note: Complete standard sheets are made available by Beuth
GB/T 1038-2000
Title: Plastic Film and sheeting – Determination of gas transmission – Differential-pressure method Category: Plastic Film and Packaging Related standards: ISO 15105-1, ISO 2782-1 Please
DIN EN 14879-2:2007-02
Title: Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media – Part 2: Coatings on metallic
DIN 10967-4:2002-05
Title: Sensory analysis – Investigation of profiles – Part 4: Testing plans Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth
ASTM F1927-07
Title: Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
DIN EN ISO 17491-4:2008-12
Title: Protective clothing – Test methods for clothing providing protection against chemicals – Part 4: Determination of resistance to penetration by a spray of liquid
DIN EN ISO 7783-2
Title: Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 2: Determination and classification of water-vapour transmission rate
ASTM D3985-05
Title: Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor Category: Plastic Film and Packaging Related standards:
ASTM F2130-09
Title: Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation through Protective Clothing Material Category: Protective Clothing Please note: Complete standard
ASTM D2517-06
Title: Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings Category: Thermoset Please note: Complete standard sheets are made available by Beuth Verlag.
DIN EN 13192:2002-03
Title: Non-destructive testing – Leak test – Calibration of gaseous reference leaks; German version EN 13192:2001 Category: Leak Testing Please note: Complete standard sheets are
ASTM F1001-99a(2006)
Title:Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials Category: Protective Clothing Please note: Complete standard sheets are made available by Beuth Verlag.
DIN EN ISO 6145-10:2008-11
Title: Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 10: Permeation method (ISO 6145-10:2002); German version EN ISO 6145-10:2008
ASTM F1407-99a(2006)
Title:Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation – Permeation Cup Method Category: Protective Clothing Please note: Complete standard sheets
DIN EN 1593:1999-11
Title: Non-destructive testing – Leak testing – Bubble emission techniques; German version EN 1593:1999 Please note: Appendix ZA deleted without replacement Category: Leak Testing Please
DIN EN 13184:2001-07
Title: Non-destructive testing – Leak test – Pressure change method; German version EN 13184:2001 Please note:Appendix ZA deleted without replacement Category: Leak Testing Please note:
ASTM D4298-04
Title: Standard Guide for Intercomparing Permeation Tubes to Establish Traceability Category: Preparation of Calibration Gas Please note: Complete standard sheets are made available by Beuth
ASTM E96/E96M-05
Title: Standard Test Methods for Water Vapor Transmission of Materials Category: Water Vapor Permeability Related standard: DIN EN 1931, DIN EN 12086, DIN EN ISO
ASTM F2338-09
Title: Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method Category:Plastic Film and Packaging Please note: Complete standard sheets are
Do you need help or further information?
Dr. Andreas Konrad