DIN EN 1062-3:2008-04
Title: Paints and varnishes – Coating materials and coating systems for exterior masonry and concrete – Part 3: Determination of liquid water permeability; German version
Norms and standards
While working with the topic of permation and our customers, especially from material development and testing, we are faced with many different standards and norms. We have outlined the most important standards and categorized them according to their: Standard system (ISO, Federal Standard, …) Category (Elastomer, packaging, …)
DIN EN ISO 2556:2001-01
Title: Plastics – Determination of the gas transmission rate of films and thin sheets under atmospheric pressure – Manometric method (ISO 2556:1974); German version EN
DIN EN ISO 15106-1:2005-05
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 1: Humidity detection sensor method (ISO 15106-1:2003); German version EN
DIN EN 1015-19
Title: Methods of test for mortar for masonry – Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars Category: Building Materials
DIN 10964:1996-02
Titel: Sensorische Prüfverfahren – Einfach beschreibende Prüfung Kategorie: Sensorische Analyse Bitte beachten Sie: Vollständige Normblätter erhalten sie beim Beuth Verlag.
ISO 6530:2005-02
Title: Protective clothing – Protection against liquid chemicals – Test method for resistance of materials to penetration by liquids Category: Protective Clothing Please note: Complete
ISO 2782:2006-10
Title: Rubber, vulcanized or thermoplastic — Determination of permeability to gases Categor<: Elastomer Please note: Complete standard sheets are made available by Beuth Verlag.
OENORM EN ISO 6529:2003-08-01
Title: Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001) Category: Protective
ISO 11092:1993-10
Title: Textiles; physiological effects; measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) Category: Textiles Please note: Complete standard sheets are made
ISO 15106-3
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 3: Electrolytic detection sensor method Category: Plastic Film and Packaging
DIN 10967-3:2001-08
Title:Sensory analysis – Investigation of profiles – Part 3: Free choice profiling Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth
DIN EN 16523-1
Title: Determination of material resistance to permeation by chemicals – Part 1: Permeation by liquid chemical under conditions of continuous contact Category: Building Materials and
DIN EN 13625:2002-03
Title: Non-destructive testing – Leak test – Guide to the selection of instrumentation for the measurement of gas leakage; German version EN 13625:2001 Category: Leak
DIN EN 374-3:2003-12
Title: Protective gloves against chemicals and micro-organisms – Part 3: Determination of resistance to permeation by chemicals; German version EN 374-3:2003 Please note: Has been
DIN EN 14126:2004-01
Title: Protective clothing – Performance requirements and test methods for protective clothing against infective agents; German version EN 14126:2003 Please note: Has been revised: DIN
ASTM F1194-99(2005)
Title: Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing Category: Protective Clothing Please note: Complete standard sheets
ISO 3591:1977-06
Title: Sensory analysis; Apparatus; Wine-tasting glass Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth Verlag.
DIN 4815-1:2009-06
Title: Rubber and plastics hoses for liquefied petroleum gas – Part 1: Hoses and tubings Category: Hoses Please note: Complete standard sheets are made available
ASTM F372-99
Title: Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique Category: Barrier Materials Related standards: DIN 53380-4,
DIN EN 388
Title: Protective gloves against mechanical risks Category: Protective Clothing Please note: Complete standard sheets are made available by Beuth Verlag.
ISO 6145-10:2002-02
Title: Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 10: Permeation method Category: Preparation of Calibration Gas Please note:
ISO 15106-2
Title: Plastics; Film and sheeting – Determination of water vapour transmission rate – Part 2: Infrared detection sensor method Category: Plastics Related standards: DIN 53380-4,
ISO 13302:2003-08
Title: Sensory analysis – Methods for assessing modifications to the flavours of foodstuffs due to packaging Category: Sensory Analysis Please note: Complete standard sheets are
ISO 14268:2002-12
Title: Leather – Physical and mechanical tests – Determination of water vapour permeability Category: Leather Please note: Complete standard sheets are made available by Beuth
DIN EN 993-4
Title: Methods of test for dense shaped refractory products – Part 4: Determination of permeability to gases Category: Building Materials and Products Please note: Complete
DIN 10967-2:2000-10
Title: Sensory analysis – Investigation of profiles – Part 2: Consensus profile Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth
DIN EN 943-2:2002-04
Title: Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles – Part 2: Performance requirements for gas-tight (Type 1) chemical protective
ISO 12572:2001-06
Title: Hygrothermal performance of building materials and products – Determination of water vapour transmission propertiest Category: Building Materials and Products Please note: Complete standard sheets
ISO 2782-2
Title: Rubber, vulcanized or thermoplastic – Determination of permeability to gases – Part 2: Equal-pressure method Category: Elastomer Related standards: ISO 15105-2 Please note: Complete
DIN EN ISO 15106-2:2005-05
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 2: Infrared detection sensor method (ISO 15106-2:2003); German version EN
ISO 11058
Title: Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, without load Category: Textiles Please note: Complete standard sheets are
DIN 10955:2004-06
Title: Sensory analysis – Testing of packaging materials and packages for foodstuffs Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth
ASTM F2622-8
Title: Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors Category: Plastics Please note: Complete standard sheets are
DIN EN 12087:2007-06
Title: Thermal insulating products for building applications – Determination of long term water absorption by immersion; German version EN 12087:1997 + A1:2006 Category: Thermal Insulating
DIN EN 13034:2009-08
Title: Protective clothing against liquid chemicals – Performance requirements for chemical protective clothing offering limited protective performance against liquid chemicals (Type 6 and Type PB
DIN EN ISO 6529:2003-01
Title: Protective clothing – Protection against chemicals – Determination of resistance of protective clothing materials to permeation by liquids and gases (ISO 6529:2001); German version
DIN EN 13469:2001-12
Title: Thermal insulating products for building equipment and industrial installations – Determination of water vapour transmission properties of preformed pipe insulation; German version EN 13469:2001
DIN EN 1518:1998-06
Title: Non-destructive testing – Leak testing – Characterization of mass spectrometer leak detectors; German version EN 1518:1998 Category: Leak Testing Please note: Complete standard sheets
NF X20-209:1979-12-01
Title: Preparation of calibration gas mixtures. Permeation method. Category: Preparation of Calibration Gas Please note: Complete standard sheets are made available by Beuth Verlag.
ISO 7229:1997-02
Title: Rubber- or plastics-coated fabrics — Measurement of gas permeability Category: Coated Fabrics Please note: Complete standard sheets are made available by Beuth Verlag.
ASTM F1307-02
Title: Standard Test Method for Oxygen Transmission Rate through dry Packages; Using a Coulometric Sensor Category: Plastic Film and Packaging Related standards: ASTM D3985-05, ASTM
ISO 1663:2007-05
Title: Rigid cellular plastics – Determination of water vapour transmission properties Category: Cellular Plastics Please note: Complete standard sheets are made available by Beuth Verlag.
DIN EN 14786
Title: Protective clothing – Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions – Atomizer test Category: Protective Clothing Please note: Complete
DIN EN 1931
Title: Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Determination of water vapour transmission properties; German version EN 1931:2000
DIN EN ISO 4080:1995-04
Title: Rubber and plastics hoses and hose assemblies – Determination of permeability to gas (ISO 4080:1991); German version EN ISO 4080:1995; q. v. draft standard
ASTM D5886-95(2006)
Title: Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications Category: Geomembranes and Geotextiles Please note:
ISO 15105-1
Title: Plastics – Film and sheeting – Determination of gas-transmission rate – Part 1: Differential-pressure methods Category: Plastics Related standards: GB/T 1038-2000, ISO 2782-1 Please
ISO 17491-3:2008-08
Title: Protective clothing – Test methods for clothing providing protection against chemicals – Part 3: Determination of resistance to penetration by a jet of liquid
ASTM D1653-03(2008)
Title: Standard Test Methods for Water Vapor Transmission of Organic Coating Films Category: Paints & Coatings Please note: Complete standard sheets are made available by
DIN EN 1609:2007-06
Title: Thermal insulating products for building applications – Determination of dimensional short term water absorption by partial immersion; German version EN 1609:1996 + A1:2006 Category:
DIN 10462:1988-10
Title: Sensory analysis and benchmark of milk Please note: Withdrawn standard Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth Verlag.
ISO 2528
Title: Sheet materials — Determination of water vapour transmission rate — Gravimetric (dish) method Category: Paints & Coatings Related standards: DIN 53122-1, ISO 6179 Please
DIN 53370:2006-11
Title: Testing of plastics films – Determination of the thickness by mechanical scanning Category: Plastic Film and Packaging Please note: Complete standard sheets are made
ISO 15106-4
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Part 4: Gas-chromatographic detection sensor method Category: Plastics Related standard: DIN
ASTM F1249-06
Title: Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor Category: Water Vapor Permeability Related standards:
ASTM D3079-94(2009)e1
Title: Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products Category: Plastic Film and Packaging Please note: Complete standard sheets
ASTM D6304-07
Title: Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fisher Titration Category: Determination of Water Content
ASTM F739-07
Title: Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact Category:Protective Clothing Please note: Complete standard
DIN EN 1779:1999-10
Title: Non-destructive testing – Leak testing – Criteria for the method and technique selection; German version EN 1779:1999 Please note: Has been revised: DIN EN
DIN EN ISO 6530:2005-05
Title: Protective clothing – Protection against liquid chemicals – Test method for resistance of materials to penetration by liquids (ISO 6530:2005); German version EN ISO
DIN EN 12023:1996-11
Title: Self adhesive tapes – Measurement of water vapour transmission in a warm humid atmosphere; German version EN 12023:1996 Category: Adhesives & Sealants Please note:
DIN EN ISO 8469:2006-10
Title: Small craft – Non-fire-resistant fuel hoses (ISO 8469:2006); German version EN ISO 8469:200 Category: Hoses Please note: Complete standard sheets are made available by
ASTM F1770-97e1
Title:Standard Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor Please note:Withdrawn standard, no replacement Category: Plastic Film
NF S75-501-3; NF EN 374-3:2004-04-01
Title: Protective gloves against chemicals and micro-organisms – Part 3 : determination of resistance to permeation by chemicals. Category: Plastic Film and Packaging Please note:
DIN 53380-2
Title: Testing of plastics – Determination of gas transmission rate – Part 2: Manometric method for testing of plastic films Category: Plastics Please note: Complete
TAPPI T464 OM-12
Title: Water Vapor Transmission Rate of Paper and Paperboard at High Temperature and Humidity Category: Paper and Board Please note: Complete standard sheets are made
DIN 55431-3:1987-12
Title: Package; composite can; Test methods for water vapour permeability; gravimetric summary procedure Please note: Withdrawn standard Category: Packaging Please note: Complete standard sheets are
DIN EN ISO 9237
Title: Textiles – Determination of permeability of fabrics to air (ISO 9237:1995); German version EN ISO 9237:1995 Category: Textiles Related standards: ISO 7231, ISO 8272,
ASTM D7407-07
Title: Standard Guide for Determining The Transmission of Gases Through Geomembranes Category: Geomembranes and Geotextiles Please note: Complete standard sheets are made available by Beuth
ISO 17491-4:2008-08
Title: Protective clothing – Test methods for clothing providing protection against chemicals – Part 4: Determination of resistance to penetration by a spray of liquid
DIN EN 13832-2:2006-11
Title: Footwear protecting against chemicals – Part 2: Requirements for footwear resistant to chemicals under laboratory conditions; German version EN 13832-2:2006 Category: Footwear Please note:
ASTM F739-12
Title: Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact Category: Protective Clothing Please note: Complete
ISO 9932:1990-10
Title: Paper and board — Determination of water vapour transmission rate of sheet materials — Dynamic sweep and static gas methods Category: Paper and Board
DIN EN ISO 17081:2008-07
Title: Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (ISO 17081:2004); German version EN
DIN EN 13832-1:2006-11
Title: Footwear protecting against chemicals – Part 1: Terminology and test methods; German version EN 13832-1:2006 Category: Footwear Please note: Complete standard sheets are made
JIS K 7129
Title: Plastics – Film and sheeting – Determination of water vapour transmission rate – Instrumental method Category: Plastic Film and Packaging Please note: Complete standard
ISO 13301:2002-09
Title: Sensory analysis – Methodology – General guidance for measuring odour, flavour and taste detection thresholds by a three-alternative forced-choice (3-AFC) procedure Category: Sensory Analysis
JIS Z 0208
Title: Testing methods for determination of the water vapour transmission rate of moisture-proof packaging materials (dish method) Category: Plastic Film and Packaging Related standards: DIN
DIN 10956:2007-08
Title: Apparatus for sensory analysis – Universal testing glasses and lids – Requirements and instructions for use Category: Sensory Analysis Please note: Complete standard sheets
JIS L 1099:2006-10-20
Title: Testing methods for water vapour permeability of textiles Category: Textiles Please note: Complete standard sheets are made available by Beuth Verlag.
DIN 53380-3
Title: Testing of plastics – Determination of gas transmission rate – Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings
ASTM F2207-06
Title: Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe Category: Paints & Coatings Please note: Complete standard sheets are made
ASTM D5886-95(2001)
Title: Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications Category:Geomembranes and Geotextiles Please note: Complete
ASTM F2476-05
Title: Testing of plastics – Determination of gas transmission rate – Part 5: Optical method for plastic films and plastic moulded parts Category: Barrier Materials
TAPPI T448 OM-09
Title: Water vapor transmission rate of paper and paperboard at 23°C and 50% RH Category: Paper and Board Please note: Complete standard sheets are made
DIN 18556:1985-01
Title: Testing of coating material for synthetic resin plasters and of synthetic resin plasters Category: Paints & Coatings Please note: Complete standard sheets are made
DIN EN 374-1:2003-12
Title: Protective gloves against chemicals and micro-organisms – Part 1: Terminology and performance requirements; German version EN 374-1:2003 Please note: q. v. draft standard DIN
DIN EN 13515:2002-03
Title: Footwear – Test methods for uppers and lining – Water vapour permeability and absorption; German version EN 13515:2001 Category: Footwear Please note: Complete standard
DIN EN 14605:2009-08
Title: Protective clothing against liquid chemicals – Performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to
DIN 55431-4:1990-05
Title: Packages; tins; composite can, round, cylindric; Examination on impermeability opposite liquid filling materials Please note: Withdrawn standard Category: Packaging Please note: Complete standard sheets
DIN 10972:2003-08
Title: Sensory testing method – “A” – “not A” testing Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth Verlag.
DIN EN ISO 4022:2006-06
Title: Permeable sintered metal materials – Determination of fluid permeability (ISO 4022:1987); German version EN ISO 4022:2006 Category: Sintered Metals Please note: Complete standard sheets
ISO 8587:2006-11
Title: Sensory analysis – Methodology – Ranking Category: Sensory Analysis Please note: Complete standard sheets are made available by Beuth Verlag.
ISO 6179:1998-04
Title: Rubber, vulcanized or thermoplastic — Rubber sheets and rubber-coated fabrics — Determination of transmission rate of volatile liquids (gravimetric technique) Category: Elastomer Please note:
DIN EN 420:2003-12
Title: Protective gloves – General requirements and test methods; German version EN 420:2003 Please note: q. v. draft standard DIN EN 420/A1:2007-07 Category: Protective Clothing
ASTM D3609-00(2005)
Title: Standard Practice for Calibration Techniques Using Permeation Tubes Category: Preparation of Calibration Gas Please note: Complete standard sheets are made available by Beuth Verlag.
DIN EN ISO 17491-3:2008-12
Title: Protective clothing – Test methods for clothing providing protection against chemicals – Part 3: Determination of resistance to penetration by a jet of liquid
Disposables
Disposable integrity testing Content in German only! Please contact us for information in English. Vortrag Seminar Scale Up und Disposable Aspekte im Biomanufacturing 16. Oktober
DIN EN 927-5:2007-03
Title: Paints and varnishes – Coating materials and coating systems for exterior wood – Part 5: Assessment of the liquid water permeability; German version EN
Do you need help or further information?
Dr. Andreas Konrad